For this Bundling Machine, it is high working efficiency and it can bundle the finished product to a bundle of 50 pcs. It also has a wide range of application, for ice cream stick, ice scoop, tongue depressor etc.
Before you use this machine, you need debug it firstly.
1. Shaft operation
A. After the completion of the drive power,State selector switch in the manual,choose the moving axle, Press forward or reverse switch,the corresponding shaft will move into positive direction or negative direction, and you can choose high or low running speed.
B.After the completion of the drive power,State selector switch in manual state,Shaft selection switch is out of the feed shaft,After 1.5 seconds paper shaft into the enabled state. At this time can turn the handwheel by hand,and make the tape move into suitable situation.
2. Cylinder operation
State selector switch in the manual position,press the cutter switch in the screen,cutter cylinder start to work.
Press the manual operation switch in the screen.the screen go into manual operation interface:
Press cylinder selector switch,the cylinder start to work.press the switch again,the cylinder reset.
After completing the manual axle operation,If you want the machine to once again go into the automatic or single-step operation state and he automatic or single-step operation way convert,you must press the scram button and then open it,then operate the machine according to the basic operation.
After completing the manual cylinder operation,If you want the machine to once again go into the automatic or single-step operation state, you have to manually reset the cylinder, then it can be transferred to or single-step state automatically.